Installation Guide

What You'll Need

Drill with appropriate bits
Screwdriver
Pencil
Spirit level
Tape measure
Step ladder

General Installation Steps

Position the Brackets

Hold the brackets in position and mark the screw holes with a pencil. Use a spirit level to ensure they're level. For recess fitting, position brackets inside the frame. For face fitting, position above the frame.

Drill and Fix Brackets

Drill pilot holes at the marked points. Insert wall plugs if fixing to masonry. Secure the brackets with the screws provided.

Attach the Blind

Click or slide the blind headrail into the brackets. Most blinds simply clip in - push until you hear a click. Check the blind operates smoothly.

Secure and Test

Close the bracket covers if applicable. Test the blind raises and lowers smoothly. Adjust the tilt and draw functions.

Installation Tips

Always read the product-specific instructions included with your blind
Use the correct drill bit size for the wall plugs
Don't overtighten screws - this can damage the brackets
For heavy blinds, ensure brackets are securely fixed to solid material
Keep all hardware in case you need to relocate the blinds